#1 Beef Up Your Wooden Garage Entry Door
A wooden garage entry door has weak center panels that can easily be kicked in Adding a dead bolt won’t solve that problem. A way to beef up the door is to add a 1/2-in. plywood reinforcement panel and then bar it with 2x4s placed in bar-holder brackets.
How to do it: Cut the plywood to fit over the door’s center section (make sure it covers the windows but doesn’t cover the door handle). Fasten it to the door with drywall screws.
Test-fit a bracket and 2×4 against the door. Measure how far the bracket is from the wall, then cut filler strips that distance and install them. Fasten the brackets in place by drilling 1/4-in. pilot holes and inserting 3/8 x 3-in. lag screws. Place the 2x4s in the brackets.
#2: Add Inexpensive Door and Window Alarms
Keeping doors and windows locked is your first line of defense. Make wireless alarms your second. Burglars hate noises, so even a small alarm usually sends them running. The alarms are available at home centers. The alarms don’t provide the same security as pro-installed monitored systems since the wireless devices are activated by doors or windows opening (not glass breaking). Use the alarms for doors and windows in “hidden” areas of the house where you don’t normally gather and that are often dark.
How to do it: Attach the alarm to the door or window (with a screw or double-sided tape) alongside the magnetic contact strip (they don’t have to be touching, but within 1/2 in.). When the door or window opens, breaking magnetic contact, the alarm shrieks (these little units have a piercing alarm). The door alarm has a delay feature, giving you time to set the alarm and leave, then open the door and deactivate the unit when you come home, without setting it off. The window unit has an on/off switch. The alarms will work on any door or window, and the batteries last two to three years.
#3: Install a Small Safe
Most of us don’t need a big, heavy, expensive safe to secure our valuables. For $100, you can get a safe that will protect against thieves. Be sure to fasten it to the floor or wall so an intruder doesn’t walk off with it. Safes go up in price for options such as fire protection and digital or biometric (fingerprint-reading) opening systems.
How to do it: Install the wall safe or cylinder floor safe by bolting it to the floor (most safes have holes inside for just that purpose). Hide it in the corner of a closet or other inconspicuous area. Or mount the wall safe inside a wall and cover it with a picture. Or chip out a hole in your concrete slab and stick in the floor safe, then pour new concrete around it.
#4: Put Motion Detector Lighting Anywhere
Put motion detector lighting anywhere. Motion detector lights are a proven crime deterrent, and standard hard-wired models cost as little as $15. If running a power supply would be difficult, buy ones that run on solar power. The downside is the cost.